NEXT GENERATION EHV CONNECTORS HAVE ARRIVED!
DMC Power's newest product line provides all the extra strength, durability and voltage capacity required for Extra High Voltage lines with the benefits of our unique Swaging technology.
Now your crews can quickly and safely install and inspect lines up to 765kV in a fraction of the time it takes to set-up, weld and inspect.
FEATURES
-
All Bus connectors are tested Corona free for use at and above 500kV, Cable for use at above 345 & 500kV
-
Corrosion resistant material is machined to a high quality surface finish, weep holes (cable only), designed-in shielding and generous mass & radii for high ampacity and voltage
-
Reduced power loss and radio noise
-
Manufactured to the highest standards to preserve quality and connector performance
-
Swaging reduces installation time, maintenance and cost
Forms an EHV connection between two Bus spans
- PLK3039
- PLK3160
- PLK3162
- PLK3360
- PLK3361
- PLK3400
- PLK3401
- PLK3698
- PLK3700
The PLK3039 is an Offset Splice containing 2 Corona Rings and the ability to handle 500 kV
The PLK3160 is a high capacity EHV Grounding Stud that is capable of handling 500 kV
The PLK3162 is a high capacity EHV Double Grounding Stud that is capable of handling 500 kV
The PLK3360 is an End Cap with a ring that can handle 500 kV
The PLK3361 is an endcap with a ball that is able to hold 500 kV
The PLK3400 is a bus elbow with an attached Corona Ring, capable of handling 500 kV
The PLK3401 is an EHV Elbow that has a larger than normal radius for higher voltages and increase versatility. The 3", 3.5" & 4" models handle 500 kV while the 5" & 6" models are tested up to 765kV!
Our PLK36998 is an Expansion Terminal used for connector a Bus to a pad. The partial Corona Rings handle up to 500 kV
The PLK3700 is a Bus-to-Bus Expansion Support with a top-mounted Corona Ring, capable of handling 500 kV
Forms an EHV connection between two Cable spans
- CEHV9440
- CEHV9442
- CEHV9444
- CEHV9642
- CEHV9644
The CEHV9440 is an EHV Terminal with a Center-Formed 4" 4-hole pad. These terminals are rated to 345kV
The CEHV9442 is a 4", 4-Hole Side Formed Terminal that's rated to 500 kV
The CEHV9444 is a 4", 4-Hole Center Formed single cable Terminal capable of holding 500 kV
The CEHV9642 is a 4", 4-Hole Side Formed Dual Cable Terminal and is rated to 500 kV
The CEHV9644 is a dual cable Terminal with a 4", 4-Hole Pad at 45 degrees that is capable of holding 500 kV
Forms an EHV connection between two Bus spans
- PLK3039
- PLK3160
- PLK3162
- PLK3360
- PLK3361
- PLK3400
- PLK3401
- PLK3698
- PLK3700
The PLK3039 is an Offset Splice containing 2 Corona Rings and the ability to handle 500 kV
The PLK3160 is a high capacity EHV Grounding Stud that is capable of handling 500 kV
The PLK3162 is a high capacity EHV Double Grounding Stud that is capable of handling 500 kV
The PLK3360 is an End Cap with a ring that can handle 500 kV
The PLK3361 is an endcap with a ball that is able to hold 500 kV
The PLK3400 is a bus elbow with an attached Corona Ring, capable of handling 500 kV
The PLK3401 is an EHV Elbow that has a larger than normal radius for higher voltages and increase versatility. The 3", 3.5" & 4" models handle 500 kV while the 5" & 6" models are tested up to 765kV!
Our PLK36998 is an Expansion Terminal used for connector a Bus to a pad. The partial Corona Rings handle up to 500 kV
The PLK3700 is a Bus-to-Bus Expansion Support with a top-mounted Corona Ring, capable of handling 500 kV
Forms an EHV connection between two Cable spans
- CEHV9440
- CEHV9442
- CEHV9444
- CEHV9642
- CEHV9644
The CEHV9440 is an EHV Terminal with a Center-Formed 4" 4-hole pad. These terminals are rated to 345kV
The CEHV9442 is a 4", 4-Hole Side Formed Terminal that's rated to 500 kV
The CEHV9444 is a 4", 4-Hole Center Formed single cable Terminal capable of holding 500 kV
The CEHV9642 is a 4", 4-Hole Side Formed Dual Cable Terminal and is rated to 500 kV
The CEHV9644 is a dual cable Terminal with a 4", 4-Hole Pad at 45 degrees that is capable of holding 500 kV
- PLK3039
- PLK3160
- PLK3162
- PLK3360
- PLK3361
- PLK3400
- PLK3401
- PLK3698
- PLK3700
The PLK3039 is an Offset Splice containing 2 Corona Rings and the ability to handle 500 kV
The PLK3160 is a high capacity EHV Grounding Stud that is capable of handling 500 kV
The PLK3162 is a high capacity EHV Double Grounding Stud that is capable of handling 500 kV
The PLK3360 is an End Cap with a ring that can handle 500 kV
The PLK3361 is an endcap with a ball that is able to hold 500 kV
The PLK3400 is a bus elbow with an attached Corona Ring, capable of handling 500 kV
The PLK3401 is an EHV Elbow that has a larger than normal radius for higher voltages and increase versatility. The 3", 3.5" & 4" models handle 500 kV while the 5" & 6" models are tested up to 765kV!
Our PLK36998 is an Expansion Terminal used for connector a Bus to a pad. The partial Corona Rings handle up to 500 kV
The PLK3700 is a Bus-to-Bus Expansion Support with a top-mounted Corona Ring, capable of handling 500 kV
- CEHV9440
- CEHV9442
- CEHV9444
- CEHV9642
- CEHV9644
The CEHV9440 is an EHV Terminal with a Center-Formed 4" 4-hole pad. These terminals are rated to 345kV
The CEHV9442 is a 4", 4-Hole Side Formed Terminal that's rated to 500 kV
The CEHV9444 is a 4", 4-Hole Center Formed single cable Terminal capable of holding 500 kV
The CEHV9642 is a 4", 4-Hole Side Formed Dual Cable Terminal and is rated to 500 kV
The CEHV9644 is a dual cable Terminal with a 4", 4-Hole Pad at 45 degrees that is capable of holding 500 kV
Can't Find What You Need?
Use our "Request Drawings" form to request existing drawings or to inquire about a custom solution. DMC Power's engineering department can supply various drawing formats for your use.
|
